Muxlab HDMI over IP Extender with PoE Bedienungsanleitung PDF herunterladen

8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5

Tel: (514) 905-0588 Fax: (514) 905-0589

Toll Free (North America): (877) 689-5228

E-mail: videoease@muxlab.com URL: www.muxlab.com

Specifications

Environment

HDMI 1.3a

Devices

DVD, plasma, projectors, monitors, TV, PC, laptops, servers

supporting HDMI.

Transmission

Transparent to the user

Bandwidth

225 MHz

Signals

HDMI 1.3a protocol

Connectors

One (1) HDMI receptacle.

One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair.

One (1) 3.5mm jacks for IR emitter/sensor.

Four (4) DIP Switches for device ID addressing.

Note: HDMI cables not included.

Maximum Distance

Based on a maximum

length of 6.6 ft (2 m) of

HDMI cable per end.

Cat5e/6: 330 ft (100 m) up to 1080P

Note: When installed in an electrically noisy environment, an STP

cable must be used. Also, cross-connection reduces the effective

distance depending on the grade of twisted cable used.

Latency

One (1) Frame

Compression

Motion JPEG

Bandwidth

60Mbps

Network Requirement

100BaseT for Point to Point; 1000BaseT for other configuration

IR Frequency

38KHz

RJ45 Pin

Configuration

Reverse Polarity

Sensitive. Use EIA/TIA

568A or 586B straight-

through wiring.

RJ45 Link

Pin 1 (R) Pin 2 (T)

Pin 3 (R) Pin 6 (T)

Pin 4 (R) Pin 5 (T)

Pin 7 (R) Pin 8 (T)

Cable

One (1) Cat 5e/6 or better twisted pair cables required

Power Supply

Two (2) 110-240V/5VDC power supplies with interchangeable blades

PoE

IEEE 802.3af

Power Consumption

Transmitter: 2.9 Watt Receiver: 1.8 Watt

Temperature

Operating: 0° to 40°C Storage: -20° to 85°C

Humidity: Up to 95% non-condensing

Enclosure

Metal

Dimensions

3.70” x 3.68” x 0.97” (94 x 93.5 x 24.6 mm)

Weight

1.1 lb (0.5 kg)

Compliance

Regulatory: FCC, CE, RoHS Flammability: 94V0

Warranty

2 years

Order Information

500752 HDMI Over IP Extender Kit with PoE

500752-TX HDMI Over IP Encoder with PoE

500752-RX HDMI Over IP Decoder with PoE

HDMI over IP Extender Kit with PoE

500752

Quick Installation Guide

Overview

The HDMI over IP Extender Kit with PoE (500752) allows HDMI equipment to be connected up to

330 ft. (100m) @ 1080p via one (1) Cat5e/6 unshielded twisted pair cable in a point-to-point

configuration. Point-to-multipoint and multipoint-to-multipoint is possible by connecting several

encoders and decoders to the same Ethernet network. The Encoder (500752-TX) and Decoder

(500752-RX) also support PoE (PD) if used with a PoE Ethernet Switch. The kit comes with one

(1) Encoder and one (1) Decoder as well as an IR Emitter and IR Sensor for remote control

applications.

For the point-to-multipoint and multipoint-to-multipoint configuration the Ethernet switch must

have Gigabit ports, DHCP Server capability and IGMP communications protocol. We recommend

to use the Cisco SG300 Series Managed Switches.

A MuxLab Management Software is available to simplify the configuration and utilization of the

500752. The Software can be downloaded from the MuxLab Web Site; http://muxlab.com/hdmi-

over-ip-management-software

Applications

Applications include commercial and residential AV systems, classroom projector systems, digital

signage, boardroom systems, collaborative PC systems, and medical information systems.

Installation

1. Identify the connectors on the Encoder and Decoder as indicated on the product labels.

1 2

Specifications 1
Troubleshooting 2

Inhaltsverzeichnis

Seite 1 - Specifications

Seite 2 - Troubleshooting

Kommentare zu diesen Handbüchern

Keine Kommentare

Muxlab HDMI over IP Extender with PoE Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Zubehör für elektrische Muxlab HDMI over IP Extender with PoE herunter. Muxlab HDMI over IP Extender with PoE User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Zubehör für elektrische Muxlab HDMI over IP Extender with PoE